standart

Standard Cold Room Evaporators

Capacity values in our products are calculated by adopting Eurovent standard conditions (EN 328) for R404A gas.

  • Our products can respond to small, medium and large cooling demands with wide capacity ranges.
  • Our products are designed in such a way that the circuiting is at optimum level by taking into account the pressure losses.
  • High efficiency axial type fans with Ø250-Ø300-Ø350-Ø350-Ø400-Ø450-Ø500 mm diameters are used in our products.
  • The motor protection class of the fans used in our products is IP 44 for Ø250-Ø300-Ø350-Ø400 mm fans and IP 54 for Ø450-Ø500 mm fans. Our products can respond to small, medium and large cooling demands with wide capacity ranges.
  • Our products are designed in such a way that the circuiting is at optimum level by taking into account the pressure losses.
  • High efficiency axial type fans with diameters of Ø250-Ø300-Ø350-Ø350-Ø400-Ø450-Ø500 mm are used in our products.
  • The motor protection class of the fans used in our products is IP 44 for Ø250-Ø300-Ø350-Ø400 mm fans and IP 54 for Ø450-Ø500 mm fans.
  • Blueage Heat Exchanger has the right to use different brands of fans. Depending on this situation, there may be partial differences in fan information.
  • Our products can drain the drainage water quickly and easily thanks to the inclined drain pan.
  • Thanks to the ergonomic structure of our products, the side covers and drain pan can be opened and closed easily, providing easy service.
  • Our products are provided with bottom feet and carrier feet to ensure safe shipment of the products without damage.
  • In our products, a distributor is used at the inlet of the refrigerant to ensure that the refrigerant is evenly distributed to the evaporator coil.
  • Defrost system can be applied to our products according to the conditions of use.
  • Aluminium is used in the mirror sheet material in order not to cut the copper pipes inside the products.
  • In order to protect our products against corrosion and UV rays, the temperature resistance is increased with electrostatic epoxy powder paint used in the cassette material and ensures the long life of our products.
  • Test pressure in batteries is 36 bar Maximum operating pressure is 25 bar.
  • Our products are packaged according to their size and weight.